⠀
⠀
ESC-UV-DRYER COMPACT ‘S’
This compact, high-performance ESC UV dryer is used for the rapid curing of UV inks and coatings on materials such as paper, plastic, printed circuit boards, glass and metal. The dryer is manufactured in standard in effective widths of 300, 400 and 500 mm with 1 or 2 lamps. The lamp power is 120 -160 W/cm.
Standard features:
- high UV intensity by means of optimized reflectors
- focussing reflector half shells made of aluminium
- bevelled reflecting surfaces made of aluminium, easily exchangeable
- quartz discs
- operation panel integrated in the dryer
- light protection shielding on both sides of the lamp housing
- optimum cooling with thermostatic post-chilling
- very low surface temperature on the printed substrate
- lamp capacity infinitely adjustable from 30 – 100 %
- lamps separately settable
- conveyor belt speed infinitely variable within 5 - 20 m/min.
- user manual in German or English language
- compact table-top unit with conveyor belt
- exhaust pipe on site
Optional equipment:
- higher lamp power
- tubes ozone free and/or special spectrum
- digital conveyor belt speed indicator
- motorized adjustable tunnel height
- waste air convergence
- inlet control (energy saving)
- different conveyor belt speeds
Technical data:
28/1 | 28/2 | 40/1 | 40/2 | 50/1 | 50/2 | |
max. effective drying width | 300 mm | 300 mm | 400 mm | 400 mm | 500 mm | 500 mm |
number of UV-lamps | 1 | 2 | 1 | 2 | 1 | 2 |
lamp capacity (infinitely variable) | 80 - 160 W/cm | 80 - 160 W/cm | 80 - 140 W/cm | 80 - 140 W/cm | 80 - 120 W/cm | 80 - 120 W/cm |
mains supply (50 Hz) | 3 x 400 V | 3 x 400 V | 3 x 400 V | 3 x 400 V | 3 x 400 V | 3 x 400 V |
length of conveyor belt | 1500 mm | 1800 mm | 1500 mm | 1800 mm | 1500 mm | 1800 mm |
Subject to technical modifications.